AirCharge | Air Purification | Breathing Air Module | Breathing Air Center | Containment Fill Station | Oxygen Fill Station
 Mobile Containment Fill Station | Trailers | Mobile Systems | Watercooled | Monitors | Air Storage | Compact Series
Trailers

Most Advanced Available

Trailer enclosures are made of welded 11-gauge steel, and the chassis frame is welded structural steel C-channel. Engine vibration is dampened with shock absorbing rubber mounts. Electric activated brakes are standard. The units are equipped with two ASME air storage cylinders for ample air storage capacity. A containment fill station for two SCBA cylinders with fill whips and adapters, and storage cabinet for up to ten SCBA cylinders are also standard.



DOT-Approved Trailer
Enclosed Underside
11-Gauge Sheet Metal Enclosure

Download Product Sheet

Fill Station Features
  • Certified containment
  • 3 position fill station
  • Low loading height (32”)
  • Carriage tilt-forward design
  • 0 to 6000 psig adjustable regulator
Optional Equipment
  • Dual electric and engine drive using reliable air clutch design (dimensions may vary)
  • Excessive tilt shutdown monitor
  • Two additional air storage cylinders
  • Four-bank cascade control
  • CO monitor
  • Purification cartridge monitor
  • Air reel, manual or electric rewind
  • Plug-in outlet for external battery charger
  • Three position containment fill station
  • Generator and extendable pole-mounted flood lights
  • SCBA or SCUBA capability

 

  Instrumentation
  • Emergency stop button
  • Pressure gauges - all stages
  • Oil pressure gauge
  • Hour meter
  • Diagnostic indicator lights
    Low oil pressure
    High air temperature
  • Keyed start/power switch
Features
  • 12-volt electric starting system
  • Dual axle trailer, rated for 7000 lbs.
    gross vehicle weight
  • Stainless steel control and operations panel
    located curbside and lighted for night operation
  • 10 SCBA storage
  • Enclosed underside
  • Electric brakes
  • 2 ASME storage cylinders, capacity for 4
  • 11 gauge sheet metal enclosure
  • Spare tire and rim
  • Automatic condensate drain
  • Automatic condensate drain muffler/reservoir
  • 20 gallon fuel tank
Air Purification
  • Air purification is standard
Compressor
  • 4-stage air-cooled compressor
  • 5000 or 6000 psi working pressure
 

Back to Main Product Page


General Information: info@airpower-intl.com | Sales Information: steve@airpower-intl.com

In NJ: (856) 663-1711 | Toll Free: (800) 334-4509 | Fax: (856) 663-1784

7300 North Crescent Blvd. Unit #1 • Pennsauken, NJ 08109

©2007 Airpower International, Inc. All rights reserved.